The Skate 2 map for ReSkate is a 992 MB port of New San Vanelona. Install steps, download counts, load order and the collision problems still on the list.
ReSkate Skate 2 Map: Install, Size and What Still Breaks
The ReSkate Skate 2 map is a single 992 MB port of New San Vanelona published by brassy on Thunderstore, and it landed on 5 October 2026 on the same day as the Skate 3 conversion. It sits at roughly 27.7K downloads, which makes it the second most-installed map package on the platform. It runs, it has fast travel points, and it still has collision problems that the author has not fixed.
- Package: Skate2Map by brassy, version 1.0.6, 992 MB
- Source: Thunderstore
c/reskate, mirrored on skatemods.com - Requirements: a free skate. Steam copy and ReSkate v2.0.2 or newer
- Known issue: sections of collision are missing, so some ledges and rails do not behave
- Not required: no separate DLC, no asset packs, no paid content

Official source: Packages for ReSkate on Thunderstore hosts the Skate2Map package, the skatemods.com ReSkate index mirrors it, and the ReSkate repository documents the level registration files the map uses.
What exactly is the Skate 2 map?
It is a port of the Skate 2 city, New San Vanelona, rebuilt to load inside skate. through ReSkate. ReSkate is a third-party open-source mod platform, not an EA product, and it is licensed GPL-3.0. The map mod itself is community work: geometry, textures and object placement extracted and rebuilt by brassy, with fast travel points added so you can move around the city without skating the whole way.
The 992 MB size is the largest single map package in the ReSkate catalogue, and it is roughly 40 percent bigger than the full Skate 3 map port at 690 MB. That difference is mostly texture resolution and object density in the downtown blocks, not extra playable area.
| Detail | Skate 2 map | Full Skate 3 map |
|---|---|---|
| Author | brassy | zeex64 |
| Version | 1.0.6 | 1.0.0 |
| Size | 992 MB | 690 MB |
| Downloads | ~27.7K | ~36.4K |
| First release | 5 October 2026 | 5 October 2026 |
| Fast travel points | Yes | Yes |
| Collision status | Known gaps | Playable |
The download counts move, so treat both as a snapshot from October 2026 rather than a fixed figure. The maps overview tracks both sources and the current totals.
How do you install the Skate 2 map?
The install is the same as any other ReSkate map package, and it takes about five minutes once the download finishes. You need a legitimate free copy of skate. on Steam, ReSkate installed through its launcher, and the map zip from Thunderstore or skatemods.com.
- Download the Skate2Map zip from Thunderstore. Do not unzip it.
- Open the ReSkate launcher and go to the MODS page.
- Drag the zip onto the mod list, or drop it into the
Modsfolder inside your ReSkate directory. - Launch skate. and press Insert to open the ReSkate menu.
- Enable Skate2Map on the mods tab, then open the Levels menu and select the Skate 2 entry.
- Wait for the level to load. The first load takes longer than later ones because the assets are being indexed.
Load order is controlled by Mods\mods.json. If the map does not appear in the Levels menu, the usual cause is a mod that overwrote reskate-levels.json - check that file for a Skate 2 entry and re-enable the package. The mod install guide covers the full launcher flow with screenshots of each step.
Maps do not need any other dependency. There is no separate asset pack, no framework mod and no paid key. The only requirement is the base game plus ReSkate.
Does it conflict with other map mods?
It can, and the conflict is easy to avoid once you know where it comes from. ReSkate registers every playable level in a single JSON file, so two map mods that both rewrite that file will fight, and the one loaded later wins. Column and park mods are usually safe; full city conversions are not.
The practical fix is to enable one large map at a time, load it, and switch maps through the Levels menu rather than leaving several enabled at once. Objects placed with the park editor can also collide with ported geometry, because the port uses its own collision mesh that the editor does not recognise.
Two full map conversions installed together can leave the Levels menu showing only one entry, and the missing one will look like a broken download when the real cause is load order.
The mod compatibility page lists which categories are known to interact badly with map packages, and the Skate 3 map guide covers the other large conversion in the same detail.
What is broken in the current build?
Collision is the headline issue. The package page states that some surfaces have no collision, which means you can skate through a ledge that looks solid, or fall through a ramp that should hold you. Grinds on rails that were not rebuilt correctly will drop you off mid-trick.
Fast travel points work, and they are the reason the map is playable at scale: the city is large enough that skating between districts takes minutes. The spawn point places you downtown, and the travel menu covers the main districts.
| Issue | Status in 1.0.6 |
|---|---|
| Missing collision on some ledges | Known, unfixed |
| Rails that drop the grind | Known, unfixed |
| Fast travel | Working |
| Spawn point | Working |
| Park editor objects | Can clip with ported geometry |
| Audio | Inherits base game ambience |
There is no ETA for a collision pass. The author has shipped six versions since the initial release, with the version history on the package page recording changes to spawn points and file structure rather than geometry fixes.
How does it run on a low-end PC?
ReSkate handles map streaming by adjusting its memory budget to the VRAM it detects, a fix introduced in v1.0.2 after a crash report on an RX 580. That means the Skate 2 map will load on a 4 GB card, but it will stream textures in visibly and stutter when you cross districts quickly.
The heavier load is object count. ReSkate raised its physics body cap from 8,200 to 65,000 in v1.1.0, which matters here because the ported city carries far more props than a base-game level. On a mid-range card the map is smooth in the suburbs and slows in the dense downtown blocks.
No minimum VRAM figure has been published for the map, by the author or by the ReSkate team. Anyone quoting a number is inferring it from the base game's requirements.
Is the Skate 2 map worth installing?
If you played Skate 2 and want the city back, yes - it is the only way to skate New San Vanelona inside skate., and the fast travel points make the rough collision tolerable. If you want a clean session with no surprises, the Skate 3 port is the more finished of the two.
The two maps are not exclusive. You can keep both installed and switch between them from the Levels menu, as long as they are not enabled at the same time. Download the zip, drop it in, and expect to work around a few holes in the floor.
The package page shows the current build number, and several "map will not load" reports trace back to an older zip that predates the levels registration change.
FAQ
How big is the Skate 2 map in ReSkate?
992 MB, which is the largest single map package in the catalogue. The download is a zip and should not be unpacked before installing.
Do I need Skate 2 to play this map?
No. You need skate. on Steam and ReSkate. The map is a port that runs inside skate., so the original Skate 2 disc is not required.
Why does the Skate 2 map not show in the Levels menu?
Usually a load-order problem. Check Mods\mods.json and reskate-levels.json, and enable the map package on its own before launching the game.
Is the Skate 2 map finished?
No. Collision gaps on some ledges and rails are documented on the package page and remain unfixed as of version 1.0.6.
Related Guides
- ReSkate maps overview - both download sources, sizes and how levels load
- ReSkate Skate 3 map - the other full city port, with its own install notes
- How to install ReSkate mods - the launcher flow that map packages rely on
- Mod compatibility - which mod categories conflict with large map conversions
More ReSkate Guides
Skate 3 recomp is a native PC port of the 2010 Xbox 360 game; ReSkate is a mod platform for the new free skate. No shared code — how they differ.
ReSkate is not a Steam game. It runs on top of EA's free skate., needs a Steam login and pins build 25414733. How the Steam side works.
What is ReSkate Studio? The ReSkate project's map-making tool explained, plus how map mods work and how the Barcelona art namesake differs.
ReSkate has no uninstaller. Delete its own folder, clear the leftover profile and launcher files, and restore your Steam launch options on Linux or macOS.
What is ReSkate? The unofficial open-source mod platform for EA skate. explained: offline play, self-hosted servers, and mods in one guide.
About re-skate.wiki: independent unofficial ReSkate fan site statement, sourcing and version policy, disclaimer, and contact notes.
Best ReSkate mods: Full Skate 3 Map, Skate 2 map, Skater XL ports, built-in Trainer, and top cosmetic and music picks, with versions.
How ReSkate Board Break works: break force, deck wear, nose/mid/tail snaps, repair commands and the 2.1.2 deck pack change.
